CentOS 7.3配置Nginx虛擬主機的方法步驟
實驗環境
一臺最小化安裝的CentOS 7.3虛擬機
配置基本環境
1. 安裝nginx
yum install -y epel-* yum isntall -y nginx vim
2. 建立虛機主機的站點根目錄
mkdir /var/wwwroot mkdir /var/wwwroot/site1 mkdir /var/wwwroot/site2 echo -e "site1" >> /var/wwwroot/site1/index.html echo -e "site2" >> /var/wwwroot/site2/index.html
3. 關閉CentOS的防火墻
setenforce 0 systemctl stop firewalld systemctl disable firewalld
配置基于端口的虛擬主機
1. 編輯nginx配置文件
vim /etc/nginx/conf.d/vhosts.conf
2. 添加以下內容
server { listen 8081; root /var/wwwroot/site1; index index.html; location / { } } server { listen 8082; root /var/wwwroot/site2; index index.html; location / { } }
3. 啟動 nginx
服務
systemctl start nginx
4. 在宿主機訪問兩個站點
http://192.168.204.135:8081/
http://192.168.204.135:8082/
配置基于域名的虛擬主機
1. 重新編輯nginx配置文件
vim /etc/nginx/conf.d/vhosts.conf
2. 刪除原內容,重新添加以下內容
server { listen 80; server_name site1.test.com; root /var/wwwroot/site1; index index.html; location / { } } server { listen 80; server_name site2.test.com; root /var/wwwroot/site2; index index.html; location / { } }
3. 重啟 nginx
服務
systemctl restart nginx
4. 在Windows上修改 hosts
文件
編輯 C:\Windows\System32\drivers\etc\hosts
文件,
添加以下內容(根據實際情況自己修改)
192.168.204.135 site1.test.com
192.168.204.135 site2.test.com
5. 在宿主機訪問兩個站點
http://site1.test.com/
http://site2.test.com/
配置基于IP的虛擬主機
1. 在虛擬機增加兩個IP地址
ifconfig ens33:1 192.168.204.151 ifconfig ens33:2 192.168.204.152
2. 重新編輯nginx配置文件
vim /etc/nginx/conf.d/vhosts.conf
3. 刪除原內容,重新添加以下內容
server { listen 192.168.204.151:80; root /var/wwwroot/site1; index index.html; location / { } } server { listen 192.168.204.152:80; root /var/wwwroot/site2; index index.html; location / { } }
4. 重啟 nginx
服務
systemctl restart nginx
5. 在宿主機訪問兩個站點
http://192.168.204.151/
http://192.168.204.152/
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支持本站。
版權聲明:本站文章來源標注為YINGSOO的內容版權均為本站所有,歡迎引用、轉載,請保持原文完整并注明來源及原文鏈接。禁止復制或仿造本網站,禁止在非www.sddonglingsh.com所屬的服務器上建立鏡像,否則將依法追究法律責任。本站部分內容來源于網友推薦、互聯網收集整理而來,僅供學習參考,不代表本站立場,如有內容涉嫌侵權,請聯系alex-e#qq.com處理。