docker compose部署主從復制的實現
受限于 Redis 單點性能，加上我們對數據天生就有的備份的需求，因此 Redis 提供了主從復制的服務。
本文記錄了通過 docker compose 搭建一主雙從的 Redis 服務。
配置解析
################################# REPLICATION ################################# # 【Slave】連接 Master 的配置 # slaveof 172.25.0.101 6379 # 【Slave】只讀模式 # slave-read-only yes # 【Slave】密碼 # masterauth <master-password> # 【Slave】復制期間是否允許響應查詢，可能會返回臟數據 # slave-serve-stale-data yes # 【Slave】Slave 晉級為 Master 的優先級，僅哨兵模式下生效 # slave-priority 100 # 【Slave】Slave 向 Master 報告的自己的 IP # slave-announce-ip 5.5.5.5 # 【Slave】Slave 向 Master 報告的自己的端口 # slave-announce-port 1234 # 【Slave】Slave ping Master 的時間間隔 # repl-ping-slave-period 10 # 【Master/Slave】超時時間 # repl-timeout 60 # 【Master】Diskless 就是直接將要復制的 RDB 文件寫入到 Socket 中，而不會先存儲到磁盤上 repl-diskless-sync no # 【Master】若開啟 Diskless，會等待指定秒之后再進行復制，以便讓更多客戶端可以在窗口期內連接，并行傳送 # repl-diskless-sync-delay 5 # 【Master】是否開啟 Nagle 算法，可以減少流量占用，但會同步得慢些 repl-disable-tcp-nodelay no # 【Master】環形緩沖日志的大小，給 Slave 斷開之后重連使用，避免全量復制，默認 1mb # repl-backlog-size 1mb # 【Master】當 Master 斷連所有 Slave 指定時間后，Master 會清空 backlog # repl-backlog-ttl 3600 # 【Master】當?shù)陀谥付▊€(gè) Slave 連接時，Master 拒絕所有寫操作 # min-slaves-to-write 3 # 【Master】當延遲高于指定秒數時，Master 拒絕所有寫操作 # min-slaves-max-lag 10
服務搭建
目錄結構
replication/
├── docker-compose.yml
├── master
│ ├── data
│ └── redis.conf
├── slave1
│ ├── data
│ └── redis.conf
└── slave2
├── data
└── redis.conf
Compose File
定義了一個子網，方便操作，對外暴露 6371（Master）、6372、6373 端口。
version: "3"
networks:
redis-replication:
driver: bridge
ipam:
config:
- subnet: 172.25.0.0/24
services:
master:
image: redis
container_name: redis-master
ports:
- "6371:6379"
volumes:
- "./master/redis.conf:/etc/redis.conf"
- "./master/data:/data"
command: ["redis-server", "/etc/redis.conf"]
restart: always
networks:
redis-replication:
ipv4_address: 172.25.0.101
slave1:
image: redis
container_name: redis-slave-1
ports:
- "6372:6379"
volumes:
- "./slave1/redis.conf:/etc/redis.conf"
- "./slave1/data:/data"
command: ["redis-server", "/etc/redis.conf"]
restart: always
networks:
redis-replication:
ipv4_address: 172.25.0.102
slave2:
image: redis
container_name: redis-slave-2
ports:
- "6373:6379"
volumes:
- "./slave2/redis.conf:/etc/redis.conf"
- "./slave2/data:/data"
command: ["redis-server", "/etc/redis.conf"]
restart: always
networks:
redis-replication:
ipv4_address: 172.25.0.103
實例配置
Master：
基本不用配置，最簡單的是指定一個端口就好了。
port 6379 protected-mode no repl-diskless-sync no repl-disable-tcp-nodelay no
Slave：
實例的配置保持一致就可以了，因?yàn)槎x了子網，不存在端口沖突。
port 6379 protected-mode no slaveof 172.25.0.101 6379 slave-read-only yes slave-serve-stale-data yes
啟動服務
ocker-compose up -d Creating network "replication_redis-replication" with driver "bridge" Creating redis-slave-1 ... done Creating redis-master ... done Creating redis-slave-2 ... done
查看 Master 日志，可以看到接受了兩個 Slave 的復制請求：
1:M 18 Aug 2021 15:50:31.772 * Replica 172.25.0.102:6379 asks for synchronization
1:M 18 Aug 2021 15:50:31.772 * Full resync requested by replica 172.25.0.102:6379
1:M 18 Aug 2021 15:50:31.772 * Replication backlog created, my new replication IDs are '5d27746f14ee9be9694d794f96de6ba14a669dd1' and '0000000000000000000000000000000000000000'
1:M 18 Aug 2021 15:50:31.772 * Starting BGSAVE for SYNC with target: disk
1:M 18 Aug 2021 15:50:31.773 * Background saving started by pid 19
19:C 18 Aug 2021 15:50:31.777 * DB saved on disk
19:C 18 Aug 2021 15:50:31.777 * RDB: 0 MB of memory used by copy-on-write
1:M 18 Aug 2021 15:50:31.822 * Background saving terminated with success
1:M 18 Aug 2021 15:50:31.823 * Synchronization with replica 172.25.0.102:6379 succeeded
1:M 18 Aug 2021 15:50:32.170 * Replica 172.25.0.103:6379 asks for synchronization
1:M 18 Aug 2021 15:50:32.170 * Full resync requested by replica 172.25.0.103:6379
1:M 18 Aug 2021 15:50:32.170 * Starting BGSAVE for SYNC with target: disk
1:M 18 Aug 2021 15:50:32.171 * Background saving started by pid 20
20:C 18 Aug 2021 15:50:32.175 * DB saved on disk
20:C 18 Aug 2021 15:50:32.175 * RDB: 0 MB of memory used by copy-on-write
1:M 18 Aug 2021 15:50:32.225 * Background saving terminated with success
1:M 18 Aug 2021 15:50:32.226 * Synchronization with replica 172.25.0.103:6379 succeeded
查看 Slave 日志，可以看到連接建立的全過程：
1:S 18 Aug 2021 15:50:31.771 * Connecting to MASTER 172.25.0.101:6379
1:S 18 Aug 2021 15:50:31.771 * MASTER <-> REPLICA sync started
1:S 18 Aug 2021 15:50:31.771 * Non blocking connect for SYNC fired the event.
1:S 18 Aug 2021 15:50:31.771 * Master replied to PING, replication can continue...
1:S 18 Aug 2021 15:50:31.772 * Partial resynchronization not possible (no cached master)
1:S 18 Aug 2021 15:50:31.773 * Full resync from master: 5d27746f14ee9be9694d794f96de6ba14a669dd1:0
1:S 18 Aug 2021 15:50:31.823 * MASTER <-> REPLICA sync: receiving 175 bytes from master to disk
1:S 18 Aug 2021 15:50:31.823 * MASTER <-> REPLICA sync: Flushing old data
1:S 18 Aug 2021 15:50:31.823 * MASTER <-> REPLICA sync: Loading DB in memory
1:S 18 Aug 2021 15:50:31.828 * Loading RDB produced by version 6.2.5
1:S 18 Aug 2021 15:50:31.828 * RDB age 0 seconds
1:S 18 Aug 2021 15:50:31.828 * RDB memory usage when created 1.83 Mb
1:S 18 Aug 2021 15:50:31.829 * MASTER <-> REPLICA sync: Finished with success
測試
登錄 Master，嘗試寫入新 Key。
127.0.0.1:6371> set hello world OK
登錄 Slave，查看能否讀取到：
127.0.0.1:6372> get hello "world"
Slave 嘗試寫操作：
127.0.0.1:6372> set hello redis (error) READONLY You can't write against a read only replica.
到此這篇關于docker compose部署主從復制的實現的文章就介紹到這了,更多相關docker compose 主從復制內容請搜索本站以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持本站！
版權聲明：本站文章來源標注為YINGSOO的內容版權均為本站所有，歡迎引用、轉載，請保持原文完整并注明來源及原文鏈接。禁止復制或仿造本網站，禁止在非www.sddonglingsh.com所屬的服務器上建立鏡像，否則將依法追究法律責任。本站部分內容來源于網友推薦、互聯網收集整理而來，僅供學習參考，不代表本站立場，如有內容涉嫌侵權，請聯系alex-e#qq.com處理。
關注官方微信