docker內服務訪問宿主機服務的實現
1. 場景
使用windows， wsl2 進行日常開發測試工作。 但是wsl2經常會遇到網絡問題。比如今天在測試一個項目，核心功能是將postgres 的數據使用開源組件synch 同步到clickhouse 這個工作。
測試所需組件
- postgres
- kafka
- zookeeper
- redis
- synch容器
最開始測試時，選擇的方案是， 將上述五個服務使用 docker-compose 進行編排， network_modules使用hosts模式， 因為考慮到kafka的監聽安全機制，這種網絡模式，無需單獨指定暴露端口。
docker-compose.yaml 文件如下
version: "3"
services:
postgres:
image: failymao/postgres:12.7
container_name: postgres
restart: unless-stopped
privileged: true # 設置docker-compose env 文件
command: [ "-c", "config_file=/var/lib/postgresql/postgresql.conf", "-c", "hba_file=/var/lib/postgresql/pg_hba.conf" ]
volumes:
- ./config/postgresql.conf:/var/lib/postgresql/postgresql.conf
- ./config/pg_hba.conf:/var/lib/postgresql/pg_hba.conf
environment:
POSTGRES_PASSWORD: abc123
POSTGRES_USER: postgres
POSTGRES_PORT: 15432
POSTGRES_HOST: 127.0.0.1
healthcheck:
test: sh -c "sleep 5 && PGPASSWORD=abc123 psql -h 127.0.0.1 -U postgres -p 15432 -c '\q';"
interval: 30s
timeout: 10s
retries: 3
network_mode: "host"
zookeeper:
image: failymao/zookeeper:1.4.0
container_name: zookeeper
restart: always
network_mode: "host"
kafka:
image: failymao/kafka:1.4.0
container_name: kafka
restart: always
depends_on:
- zookeeper
environment:
KAFKA_ADVERTISED_HOST_NAME: kafka
KAFKA_ZOOKEEPER_CONNECT: localhost:2181
KAFKA_LISTENERS: PLAINTEXT://127.0.0.1:9092
KAFKA_ADVERTISED_LISTENERS: PLAINTEXT://127.0.0.1:9092
KAFKA_BROKER_ID: 1
KAFKA_LOG_RETENTION_HOURS: 24
KAFKA_LOG_DIRS: /data/kafka-data #數據掛載
network_mode: "host"
producer:
depends_on:
- redis
- kafka
- zookeeper
image: long2ice/synch
container_name: producer
command: sh -c "
sleep 30 &&
synch --alias pg2ch_test produce"
volumes:
- ./synch.yaml:/synch/synch.yaml
network_mode: "host"
# 一個消費者消費一個數據庫
consumer:
tty: true
depends_on:
- redis
- kafka
- zookeeper
image: long2ice/synch
container_name: consumer
command: sh -c
"sleep 30 &&
synch --alias pg2ch_test consume --schema pg2ch_test"
volumes:
- ./synch.yaml:/synch/synch.yaml
network_mode: "host"
redis:
hostname: redis
container_name: redis
image: redis:latest
volumes:
- redis:/data
network_mode: "host"
volumes:
redis:
kafka:
zookeeper:
測試過程中因為要使用 postgres, wal2json組件,在容器里單獨安裝組件很麻煩， 嘗試了幾次均已失敗而告終，所以后來選擇了將 postgres 服務安裝在宿主機上， 容器里面的synch服務 使用宿主機的 ip,port端口。
但是當重新啟動服務后，synch服務一直啟動不起來， 日志顯示 postgres 無法連接. synch配置文件如下
core:
debug: true # when set True, will display sql information.
insert_num: 20000 # how many num to submit,recommend set 20000 when production
insert_interval: 60 # how many seconds to submit,recommend set 60 when production
# enable this will auto create database `synch` in ClickHouse and insert monitor data
monitoring: true
redis:
host: redis
port: 6379
db: 0
password:
prefix: synch
sentinel: false # enable redis sentinel
sentinel_hosts: # redis sentinel hosts
- 127.0.0.1:5000
sentinel_master: master
queue_max_len: 200000 # stream max len, will delete redundant ones with FIFO
source_dbs:
- db_type: postgres
alias: pg2ch_test
broker_type: kafka # current support redis and kafka
host: 127.0.0.1
port: 5433
user: postgres
password: abc123
databases:
- database: pg2ch_test
auto_create: true
tables:
- table: pgbench_accounts
auto_full_etl: true
clickhouse_engine: CollapsingMergeTree
sign_column: sign
version_column:
partition_by:
settings:
clickhouse:
# shard hosts when cluster, will insert by random
hosts:
- 127.0.0.1:9000
user: default
password: ''
cluster_name: # enable cluster mode when not empty, and hosts must be more than one if enable.
distributed_suffix: _all # distributed tables suffix, available in cluster
kafka:
servers:
- 127.0.0.1:9092
topic_prefix: synch
這種情況很奇怪，首先確認 postgres, 啟動，且監聽端口(此處是5433) 也正常，使用localhost和主機eth0網卡地址均報錯。
2. 解決
google 答案，參考 stackoverflow 高贊回答，問題解決，原答案如下
If you are using Docker-for-mac or Docker-for-Windows 18.03+, just connect to your mysql service using the host host.docker.internal (instead of the 127.0.0.1 in your connection string).
If you are using Docker-for-Linux 20.10.0+, you can also use the host host.docker.internal if you started your Docker
container with the --add-host host.docker.internal:host-gateway option.
Otherwise, read below
Use** --network="host" **in your docker run command, then 127.0.0.1 in your docker container will point to your docker host.
更多詳情見 源貼
host 模式下 容器內服務訪問宿主機服務
將postgres監聽地址修改如下 host.docker.internal 報錯解決。 查看宿主機 /etc/hosts 文件如下
root@failymao-NC:/mnt/d/pythonProject/pg_2_ch_demo# cat /etc/hosts # This file was automatically generated by WSL. To stop automatic generation of this file, add the following entry to /etc/wsl.conf: # [network] # generateHosts = false 127.0.0.1 localhost 10.111.130.24 host.docker.internal
可以看到，宿主機 ip跟域名的映射. 通過訪問域名，解析到宿主機ip, 訪問宿主機服務。
最終啟動 synch 服務配置如下
core:
debug: true # when set True, will display sql information.
insert_num: 20000 # how many num to submit,recommend set 20000 when production
insert_interval: 60 # how many seconds to submit,recommend set 60 when production
# enable this will auto create database `synch` in ClickHouse and insert monitor data
monitoring: true
redis:
host: redis
port: 6379
db: 0
password:
prefix: synch
sentinel: false # enable redis sentinel
sentinel_hosts: # redis sentinel hosts
- 127.0.0.1:5000
sentinel_master: master
queue_max_len: 200000 # stream max len, will delete redundant ones with FIFO
source_dbs:
- db_type: postgres
alias: pg2ch_test
broker_type: kafka # current support redis and kafka
host: host.docker.internal
port: 5433
user: postgres
password: abc123
databases:
- database: pg2ch_test
auto_create: true
tables:
- table: pgbench_accounts
auto_full_etl: true
clickhouse_engine: CollapsingMergeTree
sign_column: sign
version_column:
partition_by:
settings:
clickhouse:
# shard hosts when cluster, will insert by random
hosts:
- 127.0.0.1:9000
user: default
password: ''
cluster_name: # enable cluster mode when not empty, and hosts must be more than one if enable.
distributed_suffix: _all # distributed tables suffix, available in cluster
kafka:
servers:
- 127.0.0.1:9092
topic_prefix: synch host: host.docker.internal
core:
debug: true # when set True, will display sql information.
insert_num: 20000 # how many num to submit,recommend set 20000 when production
insert_interval: 60 # how many seconds to submit,recommend set 60 when production
# enable this will auto create database `synch` in ClickHouse and insert monitor data
monitoring: true
redis:
host: redis
port: 6379
db: 0
password:
prefix: synch
sentinel: false # enable redis sentinel
sentinel_hosts: # redis sentinel hosts
- 127.0.0.1:5000
sentinel_master: master
queue_max_len: 200000 # stream max len, will delete redundant ones with FIFO
source_dbs:
- db_type: postgres
alias: pg2ch_test
broker_type: kafka # current support redis and kafka
host:
port: 5433
user: postgres
password: abc123
databases:
- database: pg2ch_test
auto_create: true
tables:
- table: pgbench_accounts
auto_full_etl: true
clickhouse_engine: CollapsingMergeTree
sign_column: sign
version_column:
partition_by:
settings:
clickhouse:
# shard hosts when cluster, will insert by random
hosts:
- 127.0.0.1:9000
user: default
password: ''
cluster_name: # enable cluster mode when not empty, and hosts must be more than one if enable.
distributed_suffix: _all # distributed tables suffix, available in cluster
kafka:
servers:
- 127.0.0.1:9092
topic_prefix: synch
3. 總結
以--networks="host" 模式下啟動容器時，如果想在容器內訪問宿主機上的服務， 將ip修改為`host.docker.internal`
4. 參考
https://stackoverflow.com/questions/24319662/from-inside-of-a-docker-container-how-do-i-connect-to-the-localhost-of-the-mach
到此這篇關于docker內服務訪問宿主機服務的實現的文章就介紹到這了,更多相關docker訪問宿主機內容請搜索本站以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持本站！
版權聲明：本站文章來源標注為YINGSOO的內容版權均為本站所有，歡迎引用、轉載，請保持原文完整并注明來源及原文鏈接。禁止復制或仿造本網站，禁止在非www.sddonglingsh.com所屬的服務器上建立鏡像，否則將依法追究法律責任。本站部分內容來源于網友推薦、互聯網收集整理而來，僅供學習參考，不代表本站立場，如有內容涉嫌侵權，請聯系alex-e#qq.com處理。
關注官方微信